|
|
|
National Stock Number:
5315-00-849-2081
Federal Supply Class:
5315
National Item Identification Number:
008492081
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 1005474-1 | 91663 | ARMEL DE LLC | | 579R221H04 | 48306 | NORTHROP GRUMMAN SUPPORT SERVICES CORP | | 579R221H04 | 97942 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| MATERIAL | STEEL COMP 303 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | STYLE DESIGNATOR | SHOULDER | | SHANK LENGTH | 0.344 INCHES NOMINAL | | SHOULDER WIDTH ACROSS FLATS | 0.249 INCHES MINIMUM AND | | 0.250 INCHES MAXIMUM | | SHANK DIAMETER | 0.112 INCHES MINIMUM AND | | 0.235 INCHES MAXIMUM | | OVERALL LENGTH | 0.781 INCHES MINIMUM AND | | 0.813 INCHES MAXIMUM | | SECOND SHANK DIAMETER | 0.112 INCHES MINIMUM AND | | 0.235 INCHES MAXIMUM | | SECOND SHANK LENGTH | 0.391 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.031 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | SLOTTED | | SECOND END SLOT DEPTH | 0.310 INCHES NOMINAL | | SECOND END SLOT WIDTH | 0.062 INCHES NOMINAL | | FIRST END LOCATION | THREADED END | | THREAD SERIES DESIGNATOR | UNC | | NOMINAL THREAD SIZE | 0.112 INCHES | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.281 INCHES MINIMUM |
|
|