|
|
|
|
 | 5306-00-003-4146 | BOLT,CLOSE TOLERANCE | 05/14/1972 |
|
 | 5306-00-003-4146 | BOLT,CLOSE TOLERANCE |  = Manual available. | 0 |
|
 | 106467-8-72 | BOLT CLOSE TOLERANC | | 1 | | MS27576-8-72 | BOLT,CLOSE TOLERANCE |  MIDWEST AEROSPACE, LTD. | 10 | | MS27576-8-72 | BOLT | FLIGHT SOURCE INC | 18 | | MS27576-8-72R | BOLT | USS CO INC | 6 |
For additional information Register for Free Trial
|
 For additional information Register for Free Trial
|
 | CIPRD-MS27576-8-72R | DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER | 14153 | | MS27576-8-72 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE I | 80205 | | MS27576-8-72 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTM | 96906 | | MS27576-8-72R | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE I | 80205 | | 106467-8-72 | SPS TECHNOLOGIES, LLC | 80539 |
For additional information Register for Free Trial
|
 | FASTENER LENGTH | 5.146 INCHES MINIMUM AND 5.166 INCHES MAXIMUM | | HEAD STYLE | DISHED HEXAGON | | HEAD HEIGHT | 0.251 INCHES MINIMUM AND 0.266 INCHES MAXIMUM | | GRIP DIAMETER | 0.4982 INCHES MINIMUM AND 0.4991 INCHES MAXIMUM | | NOMINAL THREAD DIAMETER | 0.500 INCHES | | GRIP LENGTH | 4.500 INCHES MINIMUM AND 4.516 INCHES MAXIMUM | | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND 41.0 ROCKWELL C MAXIMUM OVERALL | | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 5.026 INCHES MINIMUM AND 5.056 INCHES MAXIMUM FIRST HOLE | | MATERIAL | STEEL OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-B-83050 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
For additional information Register for Free Trial
|
 | ACQUISITION METHOD CODE. | | 'All Departments | 1 | SUITABLE FOR COMPETITIVE ACQUISITION. |
| | ACQUISITION METHOD SUFFIX CODE. | | 'All Departments | G | THE GOVERNMENT HAS UNLIMITED RIGHTS TO THE TECHNICAL DATA AND THE DATA PACKAGE IS COMPLETE. VALID AMCS: 1 AND 2. |
| | MAJOR ORGANIZATIONAL ENTITY. | | Army | DA | Army | | Air Force | DF | Air Force | | Defense Logistics Agency. | DS | Defense Logistics Agency. |
| | PRICE | | All Departments | Price | 53.51 |
| | PRECIOUS METALS INDICATOR CODES. | | All Departments | U | Precious Metal type is unknown. |
| | CRITICALITY CODE. | | All Departments | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| | AUTOMATIC DATA PROCESSING EQUIPMENT. | | | ELECTROSTATIC DISCHARGE CODE. | | | HAZARDOUS MATERIALS INDICATOR CODE. | | All Departments | N | Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials. |
| | DEMILITARIZATION CODE. | | All Departments | A | No-USML/Non-CCLI – No DEMIL or DoD TSC required. Department of Commerce may impose licensing requirements to certain destinations. (Note 9). |
|
For additional information Register for Free Trial |
|  | | | THIS IS AN ARMY IDENTIFIED CRITICAL SAFETY ITEM. . ALL REQUESTS FOR WAIVERS OR DEVIATIONS CLASSIFIED AS CRITICAL, MAJOR, OR MINOR MUST BE FORWARDED TO THE DSC CONTRACTING OFFICER FOR REVIEW AND APPROVAL. . ALL ITEMS OF SUPPLY SHALL BE MARKED IAW MIL-STD-129. IN ADDITION, EACH UNIT PACK WILL BE MARKED WITH LOT AND SERIAL NUMBER (IF AVAILABLE), CONTRACTOR'S CAGE CODE, ACTUAL MANUFACTURER'S CAGE CODE AND PART NUMBER. BOLT, SELF RETAINING CIPRD-MS27576-8-72R REV A APPLIES IDENTIFY TO: MIL-STD-130N, 17 DEC 2007 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY "MANUFACTURER IDENTIFICATION REQUIREMENT" ONLY THE APPLICABLE MANUFACTURER'S IDENTIFICATION LOGO LISTED IN MIL-HDBK-57 SHALL BE APPLIED DIRECTLY TO SURFACE OF THE ITEM. DO NOT PLACE ON BEARING SURFACES. (MARKING NOT REQUIRED FOR INTERNAL WRENCH DRIVEN FASTENERS OR THOSE WITH A THREAD DIAMETER OF 0.190 INCHES AND UNDER). LOGO SHALL BE LISTED WITH THE DEFENSE LOGISTICS AGENCY AVIATION IN PHILADELPHIA. CONTACT US AT DLA AVIATION-NASA, 700 ROBBINS AVE. PHILA ., PA 19111 FOR LOGO INQUIRIES OR TO OBTAIN AN APPLICATION. QAP EQ003 APPLIES CRITICAL ITEM - SOURCE INSPECTION REQUIRED. IN ADDITION TO THE REQUIREMENTS SPECIFIED IN THE LATEST REVISION OF MIL-STD-129, MARK EACH UNIT PACK WITH LOT NUMBER, CONTRACTOR CAGE CODE, MANUFACTURER'S CAGE CODE AND PART NUMBER. ALERT -- ALL SAFETY CRITICAL PARTS TO BE PACKAGED QUP O F 001. EACH UNIT PACKAGE WILL BE MARKED WITH THE NSN, CONTRACT NUMBER, LOT NUMBER, CONTRACTOR CAGE CODE, MANUFACTURER' S CAGE CODE AND PART NUMBER. THIS IS AN ARMY IDENTIFIED CRITICAL SAFETY ITEM. . ALL REQUESTS FOR WAIVERS OR DEVIATIONS CLASSIFIED AS CRITICAL, MAJOR, OR MINOR MUST BE FORWARDED TO THE DSC CONTRACTING OFFICER FOR REVIEW AND APPROVAL. . ALL ITEMS OF SUPPLY SHALL BE MARKED IAW MIL-STD-129. IN ADDITION, EACH UNIT PACK WILL BE MARKED WITH LOT AND SERIAL NUMBER (IF AVAILABLE), CONTRACTOR'S CAGE CODE, ACTUAL MANUFACTURER'S CAGE CODE AND PART NUMBER. THIS IS A SAFETY CRITICAL ITEM ************************************************ MANDATORY PVT ************************************************ THE FOLLOWING REQUIREMENTS APPLY: EXTERNAL THREADS WILL BE INSPECTED FOR DIMENSIONAL CONFORMANCE IN ACCORDANCE WITH SYSTEM 23 OF FED-STD-H28/20. THIS EXCLUDES ROD END BEARINGS WHICH MAY BE GAGED USING SYSTEM 22. WIRE ROPE TERMINAL STUDS, ROD END CLEVIS' AND ALL NAILS, KEYS OR PINS (FSC 5315) MAY BE INSPECTED USING SYSTEM 21 OF FED-STD-H28/20. ------------------------------------------------ ALL PARTS WILL BE SUBJECTED TO 100% NONDESTRUCTIVE TESTING IN ACCORDANCE WITH ASTM E1444 (FOR MAGNETIC PARTS) OR LIQUID PENETRANT IN ACCORDANCE WITH ASTM E1417 (FOR NON-MAGNETIC PARTS). ANY PARTS HAVING INDICATIONS OF CRACKS SHALL BE REJECTED. DESTRUCTIVE TESTING SHALL BE PERFORMED AS SPECIFIED BY THE PROCUREMENT SPECIFICATION, DRAWING, STANDARD OR DESIGN MANUFACTURER'S REQUIREMENTS. DLAD CLAUSE 52.246-9004,PRODUCT VERIFICATION TESTING,IS HEREBY INCORPORATED,AND MAY BE INVOKED AT THE DISCRETION OF THE PROCUREMENT ACTIVITY. ASQ H1331 Table 1 Shall be used, and will take preceden ce over Sample Size Coding methods and Sampling Plan tables as outline d in military and federal specifications, standards, Commercial Item Desc riptions (CIDs) prepared by DoD activities, and those sampling plans ci ted by military service and DLA Troop Support - Quality Assurance Provi sions (QAPs). Those documents that identify the classification of cha racteristics as critical, major, and minor, shall have corresponding as sociated AQL Index values of 0.10,1.0, and 4.0 respectively. ASQ H13 31 takes precedence over non-government standard ASQ Z1.4. Those specifications, standards, CIDs, drawings and QAP s using sampling plans based on zero acceptance are excluded from these requirements, as are those not specifying characteristics as "critical", "major", and/or "minor". Quality conformance inspection requirements shall be in accordance with clause 52.246-9064. THIS IS AN ARMY IDENTIFIED CRITICAL SAFETY ITEM. . ALL REQUESTS FOR WAIVERS OR DEVIATIONS CLASSIFIED AS CRITICAL, MAJOR, OR MINOR MUST BE FORWARDED TO THE DSC CONTRACTING OFFICER FOR REVIEW AND APPROVAL. . ALL ITEMS OF SUPPLY SHALL BE MARKED IAW MIL-STD-129. IN ADDITION, EACH UNIT PACK WILL BE MARKED WITH LOT AND SERIAL NUMBER (IF AVAILABLE), CONTRACTOR'S CAGE CODE, ACTUAL MANUFACTURER'S CAGE CODE AND PART NUMBER. | Cage# 80539 and PartNumber# 106467-8-72
Cage# 80205 and PartNumber# MS27576-8-72 |
|
| | | CIPRD-MS27576-8-72R | DWG | BASIC | RE | 04/02/2008 | 04/22/2008 | 14153 | | SERIALIZATION-1 | DWG | BASIC | RE | 09/23/2006 | 09/23/2006 | 14153 | | QAP-EQ003 | QAP | BASIC | QA | 09/10/1998 | 09/23/2006 | 14153 |
|
|
|
|
|
|
|
|