|
|
|
|
 | 5305-00-005-5921 | SCREW,MACHINE | 06/16/1972 |
|
 | 5305-00-005-5921 | SCREW,MACHINE | | 0 |
|
 | NAS514P632-28P | SCREW |  FLIGHT SOURCE INC | 63 | | NAS514-P632-28P | SCREW | FLIGHT SOURCE INC | 301 |
For additional information Register for Free Trial
|
 For additional information Register for Free Trial
|
 | NAS514P632-28P | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE I | 80205 |
For additional information Register for Free Trial
|
 | FASTENER LENGTH | 1.688 INCHES MINIMUM AND 1.750 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | HEAD DIAMETER | 0.233 INCHES MINIMUM AND 0.279 INCHES MAXIMUM | | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 | | NOMINAL THREAD DIAMETER | 0.138 INCHES | | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH | | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | | SCREW MATERIAL | STEEL COMP 8630 OR STEEL COMP 4037 | | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6050 MIL SPEC 1ST MATERIAL RESPONSE OR AMS 6300 ASSN STD 2ND MATERIAL RESPONSE | | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE |
For additional information Register for Free Trial
|
 | ACQUISITION METHOD CODE. | | 'All Departments | 1 | SUITABLE FOR COMPETITIVE ACQUISITION. |
| | ACQUISITION METHOD SUFFIX CODE. | | 'All Departments | G | THE GOVERNMENT HAS UNLIMITED RIGHTS TO THE TECHNICAL DATA AND THE DATA PACKAGE IS COMPLETE. VALID AMCS: 1 AND 2. |
| | MAJOR ORGANIZATIONAL ENTITY. | | Air Force | DF | Air Force | | Navy | DN | Navy | | Defense Logistics Agency. | DS | Defense Logistics Agency. |
| | PRICE | | | PRECIOUS METALS INDICATOR CODES. | | All Departments | U | Precious Metal type is unknown. |
| | CRITICALITY CODE. | | All Departments | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| | AUTOMATIC DATA PROCESSING EQUIPMENT. | | | ELECTROSTATIC DISCHARGE CODE. | | | HAZARDOUS MATERIALS INDICATOR CODE. | | All Departments | N | Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials. |
| | DEMILITARIZATION CODE. | | All Departments | A | No-USML/Non-CCLI – No DEMIL or DoD TSC required. Department of Commerce may impose licensing requirements to certain destinations. (Note 9). |
|
For additional information Register for Free Trial |
|  | | | SCREW, MACHINE (80205) NATIONAL AEROSPACE STANDARDS IDENTIFY TO MIL-STD-130N, 17 DEC 2007 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY THIS NSN IS PROCURED AS FULLY COMPETITIVE IN ACCORDANCE WITH A MILITARY / FEDERAL SPECIFICATION/STANDARD. SEE SECTION L, CLAUSE 52.211-2 FOR ORDERING SUCH DATA. ************************************************ QUALIFIED SUPPLIERS LIST FOR MANUFACTURERS/ QUALIFIED SUPPLIERS LIST FOR DISTRIBUTORS (QSLM/QSLD) REQUIREMENT (DLA TROOP SUPPORT MARCH 1995) FOR FSC'S 5305, 5306, 5307 AND 5310 (NUTS). ONLY MANUFACTURERS/DISTRIBUTORS LISTED ON THE QSLM/QSLD ARE ELIGIBLE FOR AN AWARD PURSUANT TO THIS SOLICITATION (CLASS 3 FASTENERS). SUPPLIERS NOT QUOTING IN COMPLIANCE WITH THE QSLM/QSLD REQUIREMENT MUST INDICATE THEY ARE DEVIATING FROM THE REQUIREMENTS OF THE SOLICITATION. ANY BID/QUOTE/OFFER BASED ON A PRODUCT SUPPLIED BY OTHER THAN AN APPROVED QSL DISTRIBUTOR, EVEN THOUGH THE PRODUCT MIGHT HAVE BEEN MANUFACTURED IN ACCORDANCE WITH THE DRAWING(S) AND/OR SPECIFICATION(S) AS CITED IN THE PURCHASE ORDER TEXT (POT) IS A BID/QUOTE/OFFER WITH EXCEPTION AND MUST BE SO INDICATED BY THE QUOTER/OFFEROR. ANY PRODUCT FURNISHED UNDER A CONTRACT OR ORDER FOR A PRODUCT DESIGNATED AS PART OF THE QSL PROGRAM, UNLESS SPECIFICALLY AUTHORIZED BY THE GOVERNMENT IN WRITING, MUST FULLY COMPLY WITH THE TERMS AND CONDITIONS OF THE QSL PROGRAM. ANY PRODUCT, WHICH DOES NOT FULLY COMPLY WILL BE CONSIDERED AN UNAUTHORIZED SUBSTITUTION, AND MAY YIELD CRIMINAL PENALTIES IN ADDITION TO ANY CIVIL REMEDIES AVAILABLE TO THE GOVERNMENT. FOR THIS SOLICITATION, AND ANY RESULTING ORDER ISSUED TO AN APPROVED QSLM/QSLD SUPPLIER WHOSE QUOTE IS BASED ON COMPLIANCE WITH THE QSL PROGRAM, REFERENCES TO SOURCE INSPECTION ARE HEREBY WAIVED. IN SUCH CASES, COQC, PVT, QAP-EQ003, ASQ H1331, AND DLAD 52.246-9064, IF REFERENCED, DO NOT APPLY. FOR MORE INFORMATION ABOUT THE QSL PROGRAM GO TO THE FOLLOWING WEBSITE: http://www.troopsupport.dla.mil/ce/qsl/ -OR- WRITE TO: DLA TROOP SUPPORT, ATTN: DLA TROOP SUPPORT - NASA, BLDG 6/D, 700 ROBBINS AVENUE, PHILADELPHIA, PA 19111-5092 ************************************************ SOURCE INSPECTION REQUIRED. *** GAUGING REQUIREMENTS AS FOLLOWS *** ALL CLASS 3A AND 3B THREADS WILL BE INSPECTED FOR DIMENSIONAL CONFORMANCE IN ACCORDANCE WITH SYSTEM 22 OF FED-STD-H28/20. THIS EXCLUDES SELF-LOCKING NUTS, INTERNAL THREADS SMALLER THAN .190 INCH DIA AND EXTERNAL THREADS SMALLER THAN .138 INCH DIA. QUALITY ASSURANCE DATA SPECIFICATION STANDARD DLAD CLAUSE 52.246-9004,PRODUCT VERIFICATION TESTING,IS HEREBY INCORPORATED,AND MAY BE INVOKED AT THE DISCRETION OF THE PROCUREMENT ACTIVITY. ASQ H1331 Table 1 Shall be used, and will take precedence over Sample Size Coding methods and Sampling Plan tables as outlined in military and federal specifications, standards, Commercial Item Descriptions (CIDs) prepared by DoD activities, and those sampling plans cited by military service and DLA Troop Support - Quality Assurance Provisions (QAPs). Those documents that identify the classification of characteristics as critical, major, and minor, shall have corresponding associated AQL Index values of 0.10,1.0, and 4.0 respectively. ASQ H1331 takes precedence over non-government standard ASQ Z1.4. Those specifications, standards, CIDs, drawings and QAPs using sampling plans based on zero acceptance are excluded from these requirements, as are those not specifying characteristics as "critical", "major", and/or "minor". AWARDS OF THIS NSN MUST BE SOURCE INSPECTED UNLESS AWARDED TO A QSLM/QSLD SUPPLIER THAT IS LISTED ON THE APPLICABLE QSL LIST AND SUPPLYING MATERIAL THAT IS IN COMPLIANCE WITH THE QSL PROGRAM. | | Cage# 80205 and PartNumber# NAS514P632-28P |
|
| | | NAS514 | OTH | BASIC | | 03/12/2013 | 03/12/2013 | | | NASM7839 | OTH | BASIC | | 08/31/2011 | 08/31/2011 | | | NASM7839 | OTH | BASIC | | 10/07/2006 | 10/07/2006 | | | NAS514 | OTH | BASIC | | 10/07/2006 | 10/07/2006 | | | QAP-EQ001 | QAP | BASIC | QA | 02/13/1996 | 09/19/2006 | 14153 |
|
|
|
|
|
|
|
|